CHAINTECH COMPUTER COMPANY, LTD.
ML-757
|
| |
|
Data bus: |
32-bit VL-bus |
|
Size: |
Three-quarter length, half-height card |
|
Hard drive supported: |
Four IDE(AT) drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin primary IDE(AT) connector |
J1 |
|
40-pin secondary IDE(AT) connector |
J2 |
|
34-pin cable connector - floppy drive |
J3 |
|
10-pin serial port 1 internal, 9-pin serial port 1 - external |
J4 |
|
10-pin serial port 2 - internal |
J5 |
|
16-pin game port |
J6 |
|
25-pin parallel port - external |
J7 |
|
4-pin connector - drive active LED |
J8 |
|
PARALLEL PORT ADDRESS SELECTION | |||
|
LPT |
JP13 |
JP14 | |
| » |
LPT1 (378h) |
pins 1 & 2 closed |
pins 1 & 2 closed |
|
LPT2 (278h) |
pins 2 & 3 closed |
pins 2 & 3 closed | |
|
LPT3 (3BCh) |
pins 2 & 3 closed |
pins 1 & 2 closed | |
|
Disabled |
pins 1 & 2 closed |
pins 2 & 3 closed | |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
IDE(AT) interface enabled |
JP1/pins 1 & 2 |
closed |
|
IDE(AT) interface disabled |
JP1/pins 2 & 3 |
closed | |
| » |
Primary & secondary IDE enabled |
JP2/pins 1 & 2 |
closed |
|
Primary IDE enabled, secondary disabled |
JP2/pins 2 & 3 |
closed | |
| » |
CPU clock is 40 or 50MHz |
JP3/pins 1 & 2 |
closed |
|
CPU clock <=33MHz |
JP3/pins 2 & 3 |
closed | |
| » |
Factory configured - do not alter |
JP4 |
N/A |
| » |
Factory configured - do not alter |
JP5 |
N/A |
| » |
Floppy drive order is normal (A:, B:) |
JP6/pins 1 & 2 |
closed |
|
Floppy drive order is reversed (B:, A:) |
JP6/pins 2 & 3 |
closed | |
| » |
Floppy controller primary address is 3F0h |
JP7/pins 1 & 2 |
closed |
|
Floppy controller secondary address is 370h |
JP7/pins 2 & 3 |
closed | |
| » |
Floppy drive interface enabled |
JP8/pins 1 & 2 |
closed |
|
Floppy drive interface disabled |
JP8/pins 2 & 3 |
closed | |
| » |
Parallel port is unidirectional |
JP15 |
closed |
|
Parallel port is bi-directional |
JP15 |
open | |
| » |
Parallel port IRQ 7 select |
JP16/ 1 |
closed |
|
Parallel port IRQ 5 select |
JP16/ 2 |
closed | |
| » |
Game port enabled |
JP17 |
closed |
|
Game port disabled |
JP17 |
open | |
|
SERIAL PORT 1 ADDRESS SELECTION | |||
|
COM |
JP9 |
JP10 | |
| » |
COM1 (3F8h) |
pins 1 & 2 closed |
pins 1 & 2 closed |
|
COM3 (3E8h) |
pins 2 & 3 closed |
pins 2 & 3 closed | |
|
Disabled |
pins 2 & 3 closed |
pins 1 & 2 closed | |
|
SERIAL PORT 2 ADDRESS SELECTION | |||
|
COM |
JP11 |
JP12 | |
| » |
COM2 (2F8h) |
pins 1 & 2 closed |
pins 1 & 2 closed |
|
COM4 (2E8h) |
pins 2 & 3 closed |
pins 2 & 3 closed | |
|
Disabled |
pins 2 & 3 closed |
pins 1 & 2 closed | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Pin 1 in jumper blocks is unidentified. |
