Data bus:	16-bit ISA
Size:	Half length, full-height card
Hard drive supported:	Two IDE(AT) interface drives
Floppy drives supported:	360KB, 720KB, 1.2MB, 1.44MB

CONNECTIONS
Function	Location
40-pin IDE(AT) interface connector	J1
34-pin control cable connector - floppy drive	J2
External LED connector	J3
External power supply	J4

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Primary floppy drive I/O address enabled	JP2	open
	Alternate floppy drive I/O address enabled	JP2	closed
»	Floppy drive interface enabled	JP4	closed
	Floppy drive interface disabled	JP4	open
»	IRQ14 connected to AT bus	JP5	pins 2 & 3 closed
	IRQ14 cleared for IDE busy signal	JP5	pins 1 & 2 closed
»	IOCHRDY not connected to host	JP6	open
	IOCHRDY connected to host	JP6	closed