DATA TECHNOLOGY CORPORATION
DTC5280CA-I, DTC5280CZ-I
|
|
Data bus: 16-bit, ISA
Size: Full-length, full-height card
Hard drives supported: Two MFM ST506/412 drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
Sector interleave: DTC5280CA-I: 2:1
DTC5280CZ-I: 2:1
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin data cable connector-floppy drive |
J1 |
|
34-pin control cable connector-hard drive |
J2 |
|
20-pin data cable connector-drive 0 |
J3 |
|
20-pin data cable connector-drive 1 |
J4 |
|
4-pin connector-drive active LED |
J5 |
|
37-pin floppy drive interface connector-floppy drive (5280CZ-I only) |
J6 |
|
HARD DRIVE PORT ADDRESS | |||
|
Address |
W2 |
W3 | |
| » |
Port addresses are 1F0-1F7 3F2-3F7h |
open |
open |
|
Port addresses are 170-177 372-377h |
closed |
closed | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Jumper W5 and W6 are Factory configured - do not alter. This controller has no onboard user accessible programs. |
