Hard Drives supported	Two IDE (AT) drives Up to 7 Fast SCSI-2 devices
Floppy drives supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Data Bus	32-bit VESA Local Bus
Card Size	Three-quarter length, full-height

CONNECTIONS
Function	Location	Function	Location
4-pin connector - drive active LED	J1	50-pin SCSI connector - internal	J4
40-pin IDE(AT) connector	J2	50-pin SCSI connector - external	J5
34-pin cable connector - floppy drive	J3

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	SCSI I/O base address is 340h-35Fh	J7	Pins 1 & 2 closed
	SCSI I/O base address is 140h-15Fh	J7	Pins 2 & 3 closed
»	Floppy drive interface enabled	SW1/1	On
	Floppy drive interface disabled	SW1/1	Off
»	IDE(AT) interface enabled	SW1/2	Off
	IDE(AT) interface disabled	SW1/2	On

BIOS ADDRESS SELECTION
Address		SW1/3	SW1/4
	C8000h	Off	Off
	CC000h	Off	On
	D8000h	On	Off
»	DC000h	On	On