Data bus:	16-bit ISA
Size:	Half-length, half-height card
H ard drive supported:	Two IDE(AT) interface drives
Floppy drives supported:	360KB, 720KB, 1.2MB, 1.44MB

CONNECTIONS
Function	Location
40-pin IDE(AT) interface connector	J1
34-pin data cable connector - floppy drive	J2
4-pin connector - drive active LED	J3

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Hard drive attached to IDE controller is primary drive	J4/A	pins 2 & 3 closed
	Hard drive attached to IDE controller is alternate drive	J4/A	pins 1 & 2 closed
»	IDE interface interrupt IRQ14 select	J4/B	pins 2 & 3 closed
	IDE interface interrupt IRQ15 select	J4/B	pins 1 & 2 closed
»	IDE interface enabled	J4/C	pins 2 & 3 closed
	IDE interface disabled	J4/C	pins 1 & 2 closed
»	Floppy drive interface enabled	J4/D	pins 2 & 3 closed
	Floppy drive interface disabled	J4/D	pins 1 & 2 closed