BUSLOGIC, INC.
BT-910A
|
| |
|
Data bus: |
32-bit, PCI-bus |
|
Size: |
Full-length, full-height card |
|
Hard drive supported: |
Up to four IDE(AT) interface devices |
|
Floppy drives supported: |
None |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin connector - IDE(AT) interface 1 |
CN1 |
|
40-pin connector - IDE(AT) interface 2 |
CN2 |
|
4-pin connector - Drive activity LED |
JP1 |
|
4-pin connector - Speaker |
JP2 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Hard drive filtering for primary I/O address disabled |
JDR0 |
open | |
|
Hard drive filtering for primary I/O address enabled |
JDR0 |
closed | |
|
Hard drive filtering for secondary I/O address disabled |
JDR1 |
open | |
|
Hard drive filtering for secondary I/O address enabled |
JDR1 |
closed | |
|
IDE IRQ CHANNEL CONFIGURATION | |||||
|
Interrupt |
J3/jumper 1 |
J3/jumper 2 |
J3/jumper 3 |
J3/jumper 4 | |
|
INT A# |
closed |
open |
open |
open | |
|
INT B# |
open |
closed |
open |
open | |
|
INT C# |
open |
open |
closed |
open | |
|
INT D# |
open |
open |
open |
closed | |
|
Note: The jumper settings for Jumpers 1-4 should match the INT selection in the AutoIDEs Controller Option Select module. | |||||
|
I/O PORT CONFIGURATION - J3 | ||||
|
I/O Port |
IDE IRQ Channel |
Port Address |
J3/jumper 5 | |
|
Primary |
14 |
1F0-1F7 |
closed | |
|
Secondary |
15 |
170-177 |
open | |
|
Note: The jumper setting for Jumper 5 should match the value for the Controller I/O Port option in the AutoIDEs Controller Option Select module. | ||||
|
DRAM CONFIGURATION | ||
|
Size |
Bank 0 |
Bank 1 |
|
512KB |
(2) 256K x 9 |
NONE |
|
1MB |
(2) 256K x 9 |
(2) 256K x 9 |
|
2MB |
(2) 1M x 9 |
NONE |
|
2.5MB |
(2) 1M x 9 |
(2) 256K x 9 |
|
2.5MB |
(2) 256K x 9 |
(2) 1M x 9 |
|
4MB |
(2) 1M x 9 |
(2) 1M x 9 |
|
8MB |
(2) 4M x 9 |
NONE |
|
8.5MB |
(2) 4M x 9 |
(2) 256K x 9 |
|
8.5MB |
(2) 256K x 9 |
(2) 4M x 9 |
|
10MB |
(2) 4M x 9 |
(2) 1M x 9 |
|
10MB |
(2) 1M x 9 |
(2) 4M x 9 |
|
16MB |
(2) 4M x 9 |
(2) 4M x 9 |
