S D - 3 4 0 - 0 4 TEAC
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 3.5"/SLIMLINE Cylinders 1050| | |
Capacity form/unform 43/ MB Heads 2| | |
Seek time / track 23.0/10.0 ms Sector/track 40| | |
Controller SCSI1 SINGLE-ENDED Precompensation
Cache/Buffer 28 KB Landing Zone
Data transfer rate 1.000 MB/S int Bytes/Sector 512
2.000 MB/S ext
Recording method RLL 2/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 50 | -40 60
Power: sleep W Humidity % 8 80 | 8 80
standby W Altitude km -0.300 3.000| -0.300 12.000
idle W Shock g 5 | 70
seek W Rotation RPM 2358
read/write W Acoustic dBA 45
spin-up W ECC Bit
MTBF h 30000
Warranty Month
Lift/Lock/Park - Certificates CSA,TUV,UL478
**********************************************************************
L A Y O U T
**********************************************************************
TEAC SD-340-04 SPECIFICATION P/N 10530487-00
S0 S3
+ +------+ +
| ----+-------------------------------+------+------+-+-------+- |
| |:::::::::::::::::::::::::::::::::::::::::::::| |XXXXXXX| |
| +1--------------------------------------------+ +Power--+ |
| Signal Connector |
+------- -------+
| |
+------------------------------------------------------------------+
+------------------------------------------------------------------+
| |
| |
| |
| +-+Indicator LED |
| +-+ |
+------------------------------------------------------------------+
**********************************************************************
J U M P E R S
**********************************************************************
TEAC SD-340-04 SPECIFICATION P/N 10530487-00
Jumper Setting
==============
SCSI ID
-------
S0, S1, S2 shorted SCSI ID = 0 (Factory setting)
Parity check
------------
S3 shorted Execution of parity check (Factory setting)
Terminator factory setting: Equipped
**********************************************************************
I N S T A L L
**********************************************************************
TEAC SD-340-04 SPECIFICATION P/N 10530487-00
Notes on installation
=====================
Drive mounting
--------------
horizontally vertically
+-----------------+ +--+ +--+ +------------------+
| | | +-----+ +-----+ | | | x
| | | | | | | | x+----------------+x
+-+-----------------+-+ | | | | | | ||x x||
+---------------------+ | | | | | | || x x ||
| | | | | | || x x ||
x x | | | | | | || x x ||
+------x------x-------+ | +-----+ +-----+ | || xx ||
+-+------x--x-------+-+ +--+ +--+ || x x ||
| xx | || x x ||
| x x | || x x ||
+---x--------x----+ |x x|
x x x++----------------++x
UNACCEPTABLE! UNACCEPTABLE!
Note: Any direction of installation other than above should be de-
termined spearately by arrangement.
Mounting Holes
--------------
10-M3 tapped holes for installation (Bottom x4, each side x 3).
Front Bezel
-----------
Black, Part No. 16145890-00
LED Indicator
-------------
Green
Power Interface Connectors
--------------------------
HDD Side Connector AMP P/N 171826-4 (natural color)
or equivalent
Number of pins 4
Prevention method for mis-connection Mechanical protection of the
shape of the connector housing
Cable side matched connector AMP P/N 171822-4 (natural color)
or equivalent
Matched pin AMP P/N 170204-2 (AWG 20 26,
loose piece) or P/N 170262-2
(AWG 20 to 26, chained form),
or equivalent
Power cable The maximum power consumption of
the HDD and the voltage at the
power connector shall be taken
into consideration.
**********************************************************************
F E A T U R E S
**********************************************************************
TEAC SD-340-04 SPECIFICATION P/N 10530487-00
Seek Time
---------
+----------------------------------+--------+
| | 340-04 |
+----------------------------------+--------+
|Track-to-Track msec. typ. | 10 |
+----------------------------------+--------+
|Average msec. typ. | 23 |
| msec. max. | 50 |
+----------------------------------+--------+
|Latency msec. avg. | 12.7 |
+----------------------------------+--------+
Interleave
----------
1:1 (fixed)
Data buffer
-----------
28,672 Bytes (512 x 56)
Safety standards
----------------
(applied to the model P/N 19307371-XX only)
UL approved (standard UL478)
CSA approved (standard C22.2 No. 220)
T V approved (standard VDE0806/IEC380)
International CSA approved (standard IEC380/IEC435)
