K C 4 0 G A KYOCERA
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 3.5"/HH Cylinders 1069| 977| |
Capacity form/unform 41/ MB Heads 2| 5| |
Seek time / track 28.5/ 9.5 ms Sector/track 38| 17| |
Controller IDE / AT Precompensation
Cache/Buffer 32 KB Landing Zone
Data transfer rate 1.250 MB/S int Bytes/Sector 512
4.000 MB/S ext
Recording method RLL 2/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 60 | -40 60
Power: sleep W Humidity % 8 80 | 8 80
standby 3.4 W Altitude km -0.305 3.048| -0.305 12.192
idle 6.8 W Shock g 10 | 50
seek 8.7 W Rotation RPM 2747
read/write W Acoustic dBA 40
spin-up W ECC Bit 56
MTBF h 40000
Warranty Month
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
KYOCERA KC-40GA/80GA PRODUCT DESCRIPTION
+---------------------------------------------------------+
| |XX
| +--+J3 |XX I
| +-+RESERVED +--+ +-+J1 |XX N
| +-+ +-+ |XX T
| 1+--+ |XX E
| | |J2 |XX R
| | | |XX F
| +--+ |XX A
| |XX C
| +-+ External |XX E
| | | LED |XX
| +-+ |XX
| |
| |XX Power
| |XX
+---------------------------------------------------------+
**********************************************************************
J U M P E R S
**********************************************************************
KYOCERA KC-40GA/80GA PRODUCT DESCRIPTION
Jumper setting
--------------
J1 LED
-------
J1 can be shorted on the drive to control a common LED in a two
drive installation. Only the jumper on the drive with the LED should
be CLOSED.
J2 & J3 Drive Select Jumpers
-----------------------------
+---------------------------------------+---------------+--------+
|Drive Select | J2/jumper 1 | J3 |
+---------------------------------------+---------------+--------+
|Only drive in the system | OPEN | CLOSED|
+---------------------------------------+---------------+--------+
|Master drive in two drive system | CLOSED | OPEN |
+---------------------------------------+---------------+--------+
|Slave drive in two drive system | OPEN | OPEN |
+---------------------------------------+---------------+--------+
J2 User Configurable Jumpers
-------------------------------
+-----------------------------------+--------------+--------+
| Function | Jumper |Position|
+-----------------------------------+--------------+--------+
|Auto park enabled | J2/jumper 6 | OPEN |
+-----------------------------------+--------------+--------+
|Auto park disabled | J2/jumper 6 | CLOSED |
+-----------------------------------+--------------+--------+
|For use with common BIOS | J2/jumper 2 | OPEN |
+-----------------------------------+--------------+--------+
|For use with Compaq BIOS | J2/jumper 2 | CLOSED |
+-----------------------------------+--------------+--------+
J2/jumper 3-5 are test jumper and should be set "open".
**********************************************************************
I N S T A L L
**********************************************************************
KYOCERA KC-40GA PRODUCT DESCRIPTION
Acoustic Noise
--------------
Idle Mode 40 dBA max. (at 1 meter)
R/W Seek Mode 45 dBA max. (at 1 meter)
Mounting Screws
---------------
M4 x 0.7 x 4 (Dep.) or UNC #6-32 x 0.15"
**********************************************************************
F E A T U R E S
**********************************************************************
KYOCERA KC-40GA PRODUCT DESCRIPTION
Key Features:
Single Media for 40M Bytes
The high recording density is accomplished by a combination of MIG
Head and thin film media. Employs "zone bit density" for the most
effective use utility of the media.
32KB Buffer (32K Bytes Cache Memory)
Makes the through-put faster and the high capacity buffer makes the
execution of the zero latency time function.
Connected to IBM PC-AT and Equivalent Interface
Option of Host Adapter Board for connection to PC-AT and equivalent
interface is available.
High Speed Stepping Motor with 0.225 step and Speed Sensor Coils
The employment of 0.225 Step Angle reduces the rotation angle of
stepping motor.
Servo Controlled Head Positioning by Useful Micro Stepper Motor
The more precise positioningg is performed by Kyocera's advanced
servo control technology and micro step control technology.
Functions of Power Down and Parking
In case Read/Write/Seek command are not executed for the specified
time, the drive will go to "Save-Enegy-Mode" after moving the heads
to the park zone.
Diagnostic Function
In addition to the high performance and reliability design,
Diagnostic function is also employed for more convenient incoming
inspection at OEM and evaluations by VAR/Distributor etc.
High Reliability
Offer MTBF 40,000 hours. For higher reliability of "Data" it hold 56-
bit ECC function.
MTTR 20 minutes typical
Preventive Maintenance None
Component Design Life 5 years
Seek Times
----------
+----------------------------------+--------+
| Track to track msec. | 9.5 |
+----------------------------------+--------+
| Average msec. typ. | 28.5 |
| Average msec. max. | 55 |
+----------------------------------+--------+
|Latency msec. avg. | 10.92 |
+----------------------------------+--------+
