N D - 2 0 0 S NEWBURY DATA
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 3.5"/HH Cylinders 1320| | |
Capacity form/unform 201/ 234 MB Heads 7| | |
Seek time / track 15.0/ 3.0 ms Sector/track | | |
Controller SCSI1 SINGLE-ENDED Precompensation
Cache/Buffer KB Landing Zone
Data transfer rate 1.000 MB/S int Bytes/Sector 512
MB/S ext
Recording method RLL 1/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C |
Power: sleep W Humidity % |
standby W Altitude km |
idle W Shock g |
seek W Rotation RPM
read/write W Acoustic dBA
spin-up W ECC Bit
MTBF h 150000
Warranty Month
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
MAXTOR LXT-200S
+---+------------------------------------------------------------+
| | |
|J3 | JP6 xx JP8 |
| | +-----+ |
+--++ |||||:|<---------+ +-+ |
+--++ +-----+ | +--------------------+ | | |
| | ++. | | 9 7 5 3 1 | J5 | | |
| | || | | +----------------+ | | | |
| | || | | | X X X X . | | +-+ |
| | ++ +--->| +----------------+ | +-+ |
| | ++. | 10 8 6 4 2 | | | |
| | || +--------------------+ J2 | | |
|J1 | || | | |
| | ++ | | |
| | ++. +-+ |
| | || +-+ |
| | || J4 | | |
| | ++ LXT-XXXS PCB Layout +-+ |
+---+------------------------------------------------------------+
**********************************************************************
J U M P E R S
**********************************************************************
MAXTOR LXT-200S
Jumper Setting
==============
JP6
----
Pins *9-10 = Motor Start
*7-8 = Parity In = Enabled Out = Disabled
*5-6 = SCSI ID MSB
*3-4 = SCSI ID
1-2 = SCSI ID LSB
*JP8 = Terminator Power
SCSI Pins Pins Pins
ID 5 & 6 3 & 4 1 & 2
---- ----- ----- ------ * NOTE *
0 O O O
1 O O J O = Open
2 O J O J = Jumped
3 O J J
4 J O O * = Factory Default
5 J O J Jumped
6 J J O
7 J J J